A personal repository of random information in compensation for a fatigued biological computer
Breaded Electronics / Embedded » Home made Pick and place machine Place Mk2 » Costs
I will start to summarise costs of all the components making up this system:
X Axis
Item | Landed Cost US$ | Source | Actual / Estimate |
16mm linear rails 800mm pair + 4 x linear bearings | China | A | |
Stepper Nema 23 82mm 400 step | US$50 | China | A |
Y Axis
Item | Landed Cost US$ | Source | Actual / Estimate |
8mm shafts 792mm cut down |
USA: VXB bearings | ||
8mm linear shaft mounts | US$25 | China | |
Stepper Nema 23 56mm 400 step | US$80 | EBAY USA |
xxxxx
Item | Landed Cost US$ | Source | Actual / Estimate |
PCB's:
Item | Landed Cost US$ | Source | Actual / Estimate |
Dynomotion KFLOP Board | US$249 + US$30 shipping | Dynomotion | Actual |
Stepper control PCB | US$45 | China | |
PIC Interface PCB | US$20 | My own | Est |
2 of Mosfet x 4 PCB | US$10 | My own | Est |
Parallel port breakout | US$25 | My own | Est but just DB25s were NZD20 |
Buzzer etc PCB | US$5 | My own |
xxxx